Channel & Accessories

Here at Caddy we stock the total range of Channel and accessories. You’ll find Channel profiles, Channel nuts, Cantilever Brackets, Channel fittings and accessories. Scroll down for the total range.


Channel Profiles

  • 41x41x2.5mm
  • 41x62x2.5mm
  • 41x82x2.5mm
  • 41x21x2.5mm
  • 41x41x1.6mm
  • 41x21x1.6mm
 Plain,HDG,S-Steel,G-Bond & Aluminum.
 HDG,G-Bond Welded Back to Back.
 Plain HDG S-Steel,G-Bond & Aluminum.
  • All Available in Plain, Selected available in Slotted.
  • 41x41x2mm
Fiberglass 3 Mtr


Channel Nuts

  • Available in M6, M8, M10, M12, M16
  • Available in Long, Short & No Spring
  • Available in ZP, HDG & G316 S/Steel
  • M6 Trunking Nuts ZP
  • M6, M8, M10 & M12 Slick Nuts




Cantilever Brackets

  • Standard
  • Braced
150, 300, 450, 600 or 750mm long
320, 470, 640 or 780mm long



Channel Fittings

  • Angle brackets
  • Flat plates
  • Base plates
  • Cross-over brackets
  • Beam clamps
  • Joiners



  • Plastic cover strip in 3m lengths
  • End caps 41x41 and 41x21
  • Premounted nuts M8x40 and M10x40
  • 2 & 4 Wheel Strut Trolleys





  • Threaded rod
  • Bolts and Set Screws
  • Hex Nuts
  • Washers - Flat and Spring
  • Masonry Anchors

All of the above available in ZP, HDG or St-St



Pipe Pier - Support Systems for Roof and Floor Applications

  • Protect the roof top membrane from damage
  • Supports steel pipe, copper tube and electrical conduit
  • Consists of a block of durable, UV resistant, flexible, closed-cell ETHAFOAM polyethylene foam with a section of Eri-Strut channel bonded into it
  • Absorbs vibrations and shock
  • Accommodates expansion and contraction of piping
  • Saves time by allowing use of standard strut clamps and accessories
  • Eliminates on-site cutting, drilling and measuring - reducing total installation time
For Catalogues please see Downloads page.

Admin   Terms   Contact