Hollo-Bolts by Lindapter

Lindapter's expansion bolts require access to only one side of the Structural Hollow Section (SHS), and offer a faster alternative to welding or through-bolting, enabling contractors to reduce construction time and labour costs.

Installation is quickly carried out by inserting into pre-drilled steelwork and tightening with a torque wrench.


 Available in Zinc Plated, Hot Dipped Galvanized, Stainless Steel and Sheraplex.


 Available in Zinc Plated, Stainless Steel and Sheraplex.

 Flush Fit

 Available in Zinc Plated, Stainless Steel and Sheraplex.

Hollo-Bolts can be used on a wide variety of steel hollow shape sections.  Safe working loads shown are based on use in S275 structural hollow section and are applicable to the Hollo-bolt only in both tension and shear.  Failure of the section, particularly on those with thin walls and a wide chord face, could occur at a lower figure and its strength should be checked by a qualified Structural Engineer.

Click here to download the Hollo-Bolt brochure (PDF).

Powered by GoGlobal CMS
Admin     Terms Contact