Airconditioning Duct Hardware

With the largest range of duct hardware and accessories available, Caddy Industrial Sales has what you need to manufacture Industrial and Domestic Ductwork, and we also can supply the total support system. 

We manufacture the largest range of Spigots from 150mm - 500mm in diameter.
Plain, with damper blade or internally adjustable blade, scroll down for more ideas on what we have in stock. 
 

 

Smart Band - Nylon 6.6 Flexible Banding

  • 7mm x 20Mtr & 250Mtr Reels
  • Releasable Buckles
  • Tensioning Tools Available
  • No Waste 1 Size Fits all
  • Working Load 50kg
  • Corrosion & Solvent Resistant
 

 

Access Panels

  • We stock access panels in 5 different sizes
  • Available sizes are, APO / AP1 / AP2 / AP3 / AP4
  • Access door hinges, handles and gaskets available

 

 

Tape & Banding

  • PPC duct tape
  • PPC Silver reinforced & Plain foil tape
  • PPC PE foam flange tape
  • S/Steel banding c/w buckles 
  • Poly Strap & Buckles

 

 

 

Duct Flange & Slide

  • 35mm Caddy flange x 5mtr length
  • 35mm corners to suit
  • C150 Short cleat to suit
  • Flat & reinforced drive cleat (Slide)
  • Corners to suit

 

 

 

 

Flexible Fan Connector

  • Available with 100mm of vinyl fabric and the following sizes of metal notched edges
  • 55mm, 80mm & 125mm and all in 30.5mtr rolls
  • Vinyl fabric only 200mm x 50mtr rolls
  • Vane runner single 30mtr rolls
  • Also available in fire-tested vinyl fabric.

 

 

 

 

Bell Mouth Spigot

  • Size range: 150 – 500mm diameter
  • Plain
  • Internally adjustable
  • Externally adjustable

 

 

 

 

Silicones & Sealants

  • Emmer seal
  • SB & WB duct sealant
  • Clear & grey silicone
  • Waffle pad
  • TDF machine spray also available.
  • Gal Spray Pack.

 

 

 

Duct Accessories

  • Rapid damper kits
  • Cast quadrant kits
  • V Saddles
  • Push-pull kits
  • Sash fasteners
  • Toggle latches
  • Butt hinges
  • Piano hinge
 

 

Brackets

  • Condenser support cantilever brackets in plain or braced
  • Size range: 150,300,450,600,750 plain
  • 320,470,640,780 braced
  • Kits available
  • Consisting of two brackets and an accessory pack

 

 

 

Consumables

  • Large range of aluminium, steel, and stainless blind rivets
  • Tek screws
  • TDF bolts & nuts
  • Set screws
  • Threaded rod
  • Hex nuts
  • Washers
  • Metal & Nylon Anchors
 

 

Insulation Pins & Retainers

  • Cd pins .105 x 3/4 -6" mild steel.
  • Self Stick pins .105 x 3/4 -2-1/2" Temperature range -20F -/+ 180F
  • Speed clip .105 x 1-1/4 Mild steel. 
  • Button .105 x 2" fire-rated nylon.
  • Nail Point Pins for Polyester.
  • Cup Head pins. 
  • Range of S/Steel Pins & Clips available on Request
 

For technical information please visit http://www.smoothflo.com.au

For Catalogues please see Downloads Page

 







 
Admin   Terms   Contact